SO Duplex Stainless Steel Flanges RF 900# 26"- 48" ASME B16.47 SER.B ASTM A182
1. Flange Specification:
| | | | Thickness | | | | | | Drilling | | | | Weights |
| Nom Size | OD | Weld Neck | Blind | OD of RF | Dia at Base | Bore | LTH | Dia Bevel | Bolt Circle | Bolt Length | Hole Dia | # of Holes | Weld Neck |
| | O | C | C | R | X | B | Y | A | | -1 | -2 | | |
| 26 | 40.25 | 5.31 | 6.06 | 30 | 29.25 | As the customer's discretion | 10.19 | 26 | 35.5 | 17.75 | 2.62 | 20 | 1050 |
| 28 | 43.5 | 5.81 | 6.56 | 32.25 | 31.38 | 10.88 | 28 | 38.25 | 19.5 | 2.88 | 20 | 1520 |
| 30 | 46.5 | 6.12 | 6.93 | 34.5 | 33.5 | 11.38 | 30 | 40.75 | 20.5 | 3.12 | 20 | 1820 |
| 32 | 48.75 | 6.31 | 7.31 | 36.5 | 35.75 | 11.94 | 32 | 43 | 21 | 3.12 | 20 | 2065 |
| 34 | 51.75 | 6.75 | 7.68 | 39 | 37.88 | 12.56 | 34 | 45.5 | 22.5 | 3.38 | 20 | 2450 |
| 36 | 53 | 6.81 | 7.94 | 40.5 | 40 | 12.81 | 36 | 47.25 | 22.25 | 3.12 | 24 | 2520 |
| 38 | 57.5 | 7.5 | 8.5 | 43.25 | 42.25 | 13.88 | 38 | 50.75 | 24.5 | 3.62 | 20 | 3385 |
| 40 | 59.5 | 7.75 | 8.81 | 45.75 | 44.38 | 14.31 | 40 | 52.75 | 25 | 3.62 | 24 | 3620 |
| 42 | 61.5 | 8.12 | 9.12 | 47.75 | 46.31 | 14.62 | 42 | 54.75 | 25.75 | 3.62 | 24 | 3960 |
| 44 | 64.88 | 8.44 | 9.56 | 50 | 48.62 | 15.38 | 44 | 57.62 | 27 | 3.88 | 24 | 4300 |
| 46 | 68.25 | 8.88 | 10.06 | 52.5 | 50.88 | 16.18 | 46 | 60.5 | 28.5 | 4.12 | 24 | 4640 |
| 48 | 70.25 | 9.19 | 10.38 | 54.5 | 52.88 | 16.5 | 48 | 62.5 | 29 | 4.12 | 24 | 4980 |
2. 304L Stainless Steel escription
Alloy 304/304H has good resistance to atmospheric corrosion, foods and beverages and to many organic
and inorganic chemicals in moderately oxidizing to moderately reducing environments. The high chromium
content of the alloy provides resistance to oxidizing solutions such as nitric acid up to 55% weight and up
to 176°F (80°C).
Alloy 304/304H also resists moderately aggressive organic acids such as acetic. The nickel present in the
alloy provides resistance to moderately reducing solutions such as pure phosphoric acid, whatever the
concentration, in cold solutions and up to 10% diluted hot solutions. The alloy can also operate successfully
in caustic solutions free of chlorides or fluorides at moderate temperatures.
Alloy 304/304H does not perform well in more highly reducing environments such as those containing
chlorides and sulfuric acid.
Alloy 304/304H performs well in fresh water service with low levels of chlorides (less than 100ppm). At
higher chloride levels the grade is susceptible to crevice corrosion and pitting. For successful
performance under these more severe conditions, higher molybdenum content is need such as
316/316L. Alloy 304/304H is not recommended for service in marine environments.
In most instances, the corrosion resistance of Alloys 304, 304L and 30H will be roughly equal in most
corrosive environments. However, in environments that are sufficiently corrosive to cause intergranular
corrosion of welds and heat-affected zones Alloy 304L should be used because of its low carbon content.
3. 304H Stainless Steel WN Flange Packaging
304H Stainless Steel SO Flanges are widely used in various industries including petrochemical, oil and
gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper
manufacturing, textiles and others. All our 304H Stainless Steel WN Flanges are manufactured in
accordance with international standards. 304H Stainless Steel WN Flanges are packaged to ensure that
there is no damage during transit. In case of exports, standard export packaging is done in wooden cases.
All 304H Stainless Steel WN Flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On
special requests we can also, make custom marking on 304H Stainless Steel WN Flanges.
4. Delivery:
Port:Tianjin/Shanghai/Ningbo
Lead Time :
| Quantity(Pieces) | 1 - 100 | >100 |
| Est. Time(days) | 15-30 | To be negotiated |
5. Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.
Product Tags:
|
|
Slip On Steel Pipe Flange , Duplex Stainless Steel Flange RF 900 26"- 48" Images
|
